Author Index

A

  • Abdouss, M. Studies of Effect of Reaction Conditions and the Type of Reagent on the Mechanical Properties of Modified Acrylic Fibers with Adsorptivity of Ionic Compounds [Volume 19, Issue 5, 2007]
  • Abodzadeh, M.A. Effect of Silane Compounds on the Adhesion Strength of Acrylic Lacquers to the Flame Pretreated Polypropylene Surfaces [Volume 19, Issue 4, 2006]
  • Abtahi, M. Investigation on Improvement of Natural Rubber/Reclaimed Rubber Blend Properties Using Coupling Agents [Volume 19, Issue 3, 2006]
  • Abtahi, M. An Investigation on the Effect of Reclaimed Rubber on Viscoelastic Properties and Rheology of Natural Rubber [Volume 19, Issue 4, 2006]
  • Afghani, T. Emulsion Copolymerization of Methyl Methacrylate and Butyl Acrylate: The Study of Effective Parameters on Resin Formation and its Physical Properties [Volume 19, Issue 4, 2006]
  • Ahmad Khanbeigi, F. The Effect of Chitosan MolecularWeight on the Rate of Drug Release of Prednisolone Sodium Phosphate from Chitosan Microspheres Prepared by Spray Dryer [Volume 19, Issue 3, 2006]
  • Akbari, Z. The Effect of Different Marine Coatings on the Frictional Drag Force of Vessel [Volume 19, Issue 4, 2006]
  • Akbarinezhad, E. Novel Synthesis of Water-reducible Alkyd Resin with High Hydrolytic Stability [Volume 19, Issue 4, 2006]
  • Akhavan, A. Investigation of Photo-biodegradation of Starch-filled Polyethylene Films under the Environmental Conditions of Tehran [Volume 19, Issue 5, 2007]
  • Alipoor, E. Effect of Polyaluminium Chloride and Polyacrylamide on Separation of Solid Contents from Paint Contained Waste Water by a Novel Coagulantflocculator Composition [Volume 19, Issue 2, 2006, Pages 111-119]
  • Amiri, D. Effect of Surface Chlorination on Friction Reduction in RubberWiper Blades [Volume 19, Issue 5, 2007]
  • Arabi, H. Effect of Diluent Type and Composition and the Amount of Cross-linking Agent on Bulk and Surface Morphology of Macroporous Styrene-Divinylbenzene Copolymer [Volume 19, Issue 5, 2007]
  • Ataei, M. Effect of Silane Compounds on the Adhesion Strength of Acrylic Lacquers to the Flame Pretreated Polypropylene Surfaces [Volume 19, Issue 4, 2006]
  • Azizi, H. Investigation on Properties of CaCO3-filled Polypropylene for Thermoforming Application [Volume 19, Issue 3, 2006]

B

  • Bagheri, R. Emulsion Copolymerization of Methyl Methacrylate and Butyl Acrylate: The Study of Effective Parameters on Resin Formation and its Physical Properties [Volume 19, Issue 4, 2006]
  • Bagheri, S. Effect of Radio Frequency Plasma on Polystyrene Surface Properties [Volume 19, Issue 5, 2007]
  • Bakhshandeh, G.R. Effect of Mixing Procedures and Conditions on Mechanical and Rheometrical Properties of NBR/PVC Blends [Volume 19, Issue 3, 2006]
  • Bakhshandeh, G.R. Investigation on Improvement of Natural Rubber/Reclaimed Rubber Blend Properties Using Coupling Agents [Volume 19, Issue 3, 2006]
  • Bakhshandeh, G.R. An Investigation on the Effect of Reclaimed Rubber on Viscoelastic Properties and Rheology of Natural Rubber [Volume 19, Issue 4, 2006]
  • Beheshty, M.H. Effect of MolecularWeight of Polyvinyl Acetate on Volume Shrinkage of an Unsaturated Polyester Resin [Volume 19, Issue 3, 2006]

C

  • Chenar, M.Pourafshari Fabrication of Polysulfone Hollow Fiber Membrane and Effects of Solvent and Air-gap on its Morphology [Volume 19, Issue 6, 2007]

D

  • Darestani Farahani, T. Effect of Mixing Procedures and Conditions on Mechanical and Rheometrical Properties of NBR/PVC Blends [Volume 19, Issue 3, 2006]
  • Darestani Farahani, T. Investigation on Improvement of Natural Rubber/Reclaimed Rubber Blend Properties Using Coupling Agents [Volume 19, Issue 3, 2006]
  • Darestani Farahani, T. An Investigation on the Effect of Reclaimed Rubber on Viscoelastic Properties and Rheology of Natural Rubber [Volume 19, Issue 4, 2006]

E

  • Ebrahimi, M. Novel Synthesis of Water-reducible Alkyd Resin with High Hydrolytic Stability [Volume 19, Issue 4, 2006]
  • Ebrahimi, S.A. Design and Manufacture of Actuator Based on Smart Shape Memory Polymer [Volume 19, Issue 1, 2006, Pages 23-32]
  • Ershad Langroodi, A. Viscoelastic Behaviour of Asphodel-Borax Gels [Volume 19, Issue 1, 2006, Pages 3-11]
  • Esfandeh, M. Application of Silane Compounds for Improving Adhesion of a Silicone Elastomer Top Coat to an Epoxy Primer [Volume 19, Issue 1, 2006, Pages 33-41]
  • Eskandari Sedighi, R. Effect of Polyaluminium Chloride and Polyacrylamide on Separation of Solid Contents from Paint Contained Waste Water by a Novel Coagulantflocculator Composition [Volume 19, Issue 2, 2006, Pages 111-119]

G

  • Gazaz, S.Mohammadian Investigation of Viscoelastic and Curing Properties of Carbon Black Filled SBR Compounds Using Rubber Process Analyzer [Volume 19, Issue 6, 2007]
  • Ghaffarian, S.R. Investigation of the Effect of Compatibilizer on Adhesion of Polyethylene to Plasticized Starch [Volume 19, Issue 3, 2006]
  • Ghafori, M. Investigation of the Effect of Compatibilizer on Adhesion of Polyethylene to Plasticized Starch [Volume 19, Issue 3, 2006]
  • Ghamami, S. Synthesis of Insoluble Polyorganosiloxanes and their Application for Heavy Metals Extraction [Volume 19, Issue 4, 2006]
  • Ghasemi, D. Synthesis of 4,4’-Isopropylidene Diphenol with Cation-exchange Resin Catalyst Based on Polystyrene-divinyl Benzene [Volume 19, Issue 2, 2006, Pages 143-149]
  • Ghasemi, I. Investigation on Properties of CaCO3-filled Polypropylene for Thermoforming Application [Volume 19, Issue 3, 2006]
  • Ghobadinejad, Z. Chitosan Extraction by Fungi in Solid State Fermentation [Volume 19, Issue 3, 2006]
  • Golshan Ebrahimi, N. Investigation and Optimization of Mechanical and Morphological Properties of a Three-component PP/PU/EVA Blend Using Taguchi Experimental Design [Volume 19, Issue 2, 2006, Pages 91-99]

H

  • Hadi, F. Evaluation of Reinforced Plastic Pipes Efficiency in Rotating Die System [Volume 19, Issue 4, 2006]
  • Hadi, F. Evaluation of Fibers Orientation in Pipes Produced by Rotating Die System [Volume 19, Issue 5, 2007]
  • Hajiebrahimi, M. Effect of Diluent Type and Composition and the Amount of Cross-linking Agent on Bulk and Surface Morphology of Macroporous Styrene-Divinylbenzene Copolymer [Volume 19, Issue 5, 2007]
  • Hassan Ajili, S. Investigation and Optimization of Mechanical and Morphological Properties of a Three-component PP/PU/EVA Blend Using Taguchi Experimental Design [Volume 19, Issue 2, 2006, Pages 91-99]
  • Hassanpour, S. Investigation of Photo-biodegradation of Starch-filled Polyethylene Films under the Environmental Conditions of Tehran [Volume 19, Issue 5, 2007]
  • Hosseini, S.A. Investigation of Parameters Affecting the Productivity of Electrospun Polyacrylonitrile Nanofibers [Volume 19, Issue 2, 2006, Pages 121-130]
  • Hossienkhanli, H. Effect of Surface Chlorination on Friction Reduction in RubberWiper Blades [Volume 19, Issue 5, 2007]

J

  • Jafari, S.H. An Investigation of Reactive Compatibilizer Effect on Thermal, Thermomechanical, Rheological-morphology Properties of PTT/m-LLDPE Blends [Volume 19, Issue 2, 2006, Pages 151-161]
  • Jaffarian, A. Evaluation of Fibers Orientation in Pipes Produced by Rotating Die System [Volume 19, Issue 5, 2007]
  • Jalili, R. Investigation of Parameters Affecting the Productivity of Electrospun Polyacrylonitrile Nanofibers [Volume 19, Issue 2, 2006, Pages 121-130]

K

  • Karrabi, M. Investigation on Properties of CaCO3-filled Polypropylene for Thermoforming Application [Volume 19, Issue 3, 2006]
  • Kasiriha, S.M. Novel Synthesis of Water-reducible Alkyd Resin with High Hydrolytic Stability [Volume 19, Issue 4, 2006]
  • Khademian, M. Preparation of Polypyrrole and Its Composites in Various Solutions Using Different Additives and Studying the orphology and Conductivity of the Prepared Film [Volume 19, Issue 2, 2006, Pages 131-136]
  • Khalkhali Zavih, T. Effect of Surface Chlorination on Friction Reduction in RubberWiper Blades [Volume 19, Issue 5, 2007]
  • Khonakdar, H.A. An Investigation of Reactive Compatibilizer Effect on Thermal, Thermomechanical, Rheological-morphology Properties of PTT/m-LLDPE Blends [Volume 19, Issue 2, 2006, Pages 151-161]
  • Khorasani, M. Novel Synthesis of Water-reducible Alkyd Resin with High Hydrolytic Stability [Volume 19, Issue 4, 2006]
  • Khorasani, M.M. Viscoelastic Behaviour of Asphodel-Borax Gels [Volume 19, Issue 1, 2006, Pages 3-11]
  • Khoylou, F. Investigation of Photo-biodegradation of Starch-filled Polyethylene Films under the Environmental Conditions of Tehran [Volume 19, Issue 5, 2007]
  • Kohi, N.Mahmodi Improvement of Wash Fastness of Direct Dyes on Wool and Nylon 6 by Natural and Synthetic Tannins [Volume 19, Issue 6, 2007]
  • Kokabi, M. Evaluation of Reinforced Plastic Pipes Efficiency in Rotating Die System [Volume 19, Issue 4, 2006]
  • Kokabi, M. Evaluation of Fibers Orientation in Pipes Produced by Rotating Die System [Volume 19, Issue 5, 2007]
  • Kokabi, M. Design and Manufacture of Actuator Based on Smart Shape Memory Polymer [Volume 19, Issue 1, 2006, Pages 23-32]

L

  • Liaghat, G.H. Evaluation of Reinforced Plastic Pipes Efficiency in Rotating Die System [Volume 19, Issue 4, 2006]
  • Liaghat, G.H. Evaluation of Fibers Orientation in Pipes Produced by Rotating Die System [Volume 19, Issue 5, 2007]

M

  • M. E. Khosroshahi, S. The Effect of Argon Laser Wavelength and Radiant Intensity on the Physical and Mechanical Properties of Dental Resin [Volume 19, Issue 5, 2007]
  • Maghsoudi, V. Chitosan Extraction by Fungi in Solid State Fermentation [Volume 19, Issue 3, 2006]
  • Mahdavi, H. The Effect of Chitosan MolecularWeight on the Rate of Drug Release of Prednisolone Sodium Phosphate from Chitosan Microspheres Prepared by Spray Dryer [Volume 19, Issue 3, 2006]
  • Masoodi, A. Investigating and Comparing the Type and the Effect of Alcohol and Catalyst in the Hydrolysis of Ethylene-vinyl Acetate Copolymer by FTIR Spectroscopy [Volume 19, Issue 1, 2006, Pages 67-76]
  • Mirabedini, M. Application of Silane Compounds for Improving Adhesion of a Silicone Elastomer Top Coat to an Epoxy Primer [Volume 19, Issue 1, 2006, Pages 33-41]
  • Mirabedini, S.M. The Effect of Different Marine Coatings on the Frictional Drag Force of Vessel [Volume 19, Issue 4, 2006]
  • Mirabedini, S.M. Effect of Silane Compounds on the Adhesion Strength of Acrylic Lacquers to the Flame Pretreated Polypropylene Surfaces [Volume 19, Issue 4, 2006]
  • Mirzadeh, H. Effect of Radio Frequency Plasma on Polystyrene Surface Properties [Volume 19, Issue 5, 2007]
  • Mivehchi, H. The Effect of Chitosan MolecularWeight on the Rate of Drug Release of Prednisolone Sodium Phosphate from Chitosan Microspheres Prepared by Spray Dryer [Volume 19, Issue 3, 2006]
  • Mohammad, S. Chitosan Extraction by Fungi in Solid State Fermentation [Volume 19, Issue 3, 2006]
  • Mohammadi, N. Investigation of the Effect of Compatibilizer on Adhesion of Polyethylene to Plasticized Starch [Volume 19, Issue 3, 2006]
  • Mohammadi, V. Synthesis of Insoluble Polyorganosiloxanes and their Application for Heavy Metals Extraction [Volume 19, Issue 4, 2006]
  • Mohammadian Gazaz, S. Investigation on Properties of CaCO3-filled Polypropylene for Thermoforming Application [Volume 19, Issue 3, 2006]
  • Mohseni, M. The Effect of Different Marine Coatings on the Frictional Drag Force of Vessel [Volume 19, Issue 4, 2006]
  • Montazer, M. Bleeding Reduction of Cotton Fabrics Dyed with Bifunctional Reactive Dyes during Laundering Using Polymeric Materials [Volume 19, Issue 1, 2006, Pages 59-66]
  • Morshed, M. Investigation of Parameters Affecting the Productivity of Electrospun Polyacrylonitrile Nanofibers [Volume 19, Issue 2, 2006, Pages 121-130]
  • Mortazavi, S.M. Hot Mercerizing of Cotton/Polyester Blend Fabric: The Effect of some Factors on Dye and Moisture Absorption of the Fabric [Volume 19, Issue 2, 2006, Pages 101-109]
  • Mortazavi, S.M.A. Investigation and Optimization of Mechanical and Morphological Properties of a Three-component PP/PU/EVA Blend Using Taguchi Experimental Design [Volume 19, Issue 2, 2006, Pages 91-99]
  • Mosalaaei, H. Synthesis of Insoluble Polyorganosiloxanes and their Application for Heavy Metals Extraction [Volume 19, Issue 4, 2006]
  • Mousavi Shoushtari, A. Studies of Effect of Reaction Conditions and the Type of Reagent on the Mechanical Properties of Modified Acrylic Fibers with Adsorptivity of Ionic Compounds [Volume 19, Issue 5, 2007]
  • Mozafari, S.M. Effect of MolecularWeight of Polyvinyl Acetate on Volume Shrinkage of an Unsaturated Polyester Resin [Volume 19, Issue 3, 2006]

N

  • Naeimian, F. Investigation of Photo-biodegradation of Starch-filled Polyethylene Films under the Environmental Conditions of Tehran [Volume 19, Issue 5, 2007]
  • Navid Famili, M.H. Investigation of PVC and PVC/NBR Microporous Sheets and their Application in Production of Synthetic Paper [Volume 19, Issue 3, 2006]
  • Nehzat, M.S. Emulsion Copolymerization of Methyl Methacrylate and Butyl Acrylate: The Study of Effective Parameters on Resin Formation and its Physical Properties [Volume 19, Issue 4, 2006]
  • Nodehi, A. Effect of Diluent Type and Composition and the Amount of Cross-linking Agent on Bulk and Surface Morphology of Macroporous Styrene-Divinylbenzene Copolymer [Volume 19, Issue 5, 2007]
  • Nourbakhsh, S.M.S. The Effect of Argon Laser Wavelength and Radiant Intensity on the Physical and Mechanical Properties of Dental Resin [Volume 19, Issue 5, 2007]
  • Nouri, A. Investigating and Comparing the Type and the Effect of Alcohol and Catalyst in the Hydrolysis of Ethylene-vinyl Acetate Copolymer by FTIR Spectroscopy [Volume 19, Issue 1, 2006, Pages 67-76]
  • Nouri, M. Wet Spun Blend Fibers of Silk Fibroin and Polyamide 6 [Volume 19, Issue 5, 2007, Pages 369-376]

O

  • Omidvar, A. Investigation on the Effect of Type, Quantity and Size of Straw Particles on the Mechanical Properties of Crops Straw-High Density Polyethylene Composites [Volume 19, Issue 4, 2006]
  • Oromiehi, A.R. Study of Synchronous Effect of PP-g-MA and MDBS Additives on Crystallization Temperature and Transparency of PP by Taguchi Method [Volume 19, Issue 1, 2006, Pages 13-21]

P

  • Parvazinia, M. Effect of Diluent Type and Composition and the Amount of Cross-linking Agent on Bulk and Surface Morphology of Macroporous Styrene-Divinylbenzene Copolymer [Volume 19, Issue 5, 2007]
  • Pazoki, S. The Effect of Different Marine Coatings on the Frictional Drag Force of Vessel [Volume 19, Issue 4, 2006]
  • Pazookifard, Sh. Application of Silane Compounds for Improving Adhesion of a Silicone Elastomer Top Coat to an Epoxy Primer [Volume 19, Issue 1, 2006, Pages 33-41]

R

  • Rahimi, A. Synthesis of 4,4’-Isopropylidene Diphenol with Cation-exchange Resin Catalyst Based on Polystyrene-divinyl Benzene [Volume 19, Issue 2, 2006, Pages 143-149]
  • Razavi Nouri, M. Study of Synchronous Effect of PP-g-MA and MDBS Additives on Crystallization Temperature and Transparency of PP by Taguchi Method [Volume 19, Issue 1, 2006, Pages 13-21]
  • Razavi Nouri, M. Investigation on the Effect of Extensional Flow on the β-Crystalline Phase Formation in Extruded PVDF Films [Volume 19, Issue 1, 2006, Pages 43-51]
  • Riahi samani, M. Chromium Removal from Chromium-plating Industry Waste Water Using Conductive Polymers [Volume 19, Issue 2, 2006, Pages 137-141]

S

  • Saadat Joo, N. Bleeding Reduction of Cotton Fabrics Dyed with Bifunctional Reactive Dyes during Laundering Using Polymeric Materials [Volume 19, Issue 1, 2006, Pages 59-66]
  • Sabzali Naseri, M.A. Study of Synchronous Effect of PP-g-MA and MDBS Additives on Crystallization Temperature and Transparency of PP by Taguchi Method [Volume 19, Issue 1, 2006, Pages 13-21]
  • Salehi Mobarakeh, H. Investigating and Comparing the Type and the Effect of Alcohol and Catalyst in the Hydrolysis of Ethylene-vinyl Acetate Copolymer by FTIR Spectroscopy [Volume 19, Issue 1, 2006, Pages 67-76]
  • Sarnamy, M.Khaleghi Effects of Natural Polymers and Chemical Coagulants on the Dewatering of Sewage Sludge [Volume 19, Issue 6, 2007]
  • Sattari Vafaee, A.H. Investigating and Comparing the Type and the Effect of Alcohol and Catalyst in the Hydrolysis of Ethylene-vinyl Acetate Copolymer by FTIR Spectroscopy [Volume 19, Issue 1, 2006, Pages 67-76]
  • Sedighi poor, M. Hot Mercerizing of Cotton/Polyester Blend Fabric: The Effect of some Factors on Dye and Moisture Absorption of the Fabric [Volume 19, Issue 2, 2006, Pages 101-109]
  • Semnani rahbar, M. Effect of Polyaluminium Chloride and Polyacrylamide on Separation of Solid Contents from Paint Contained Waste Water by a Novel Coagulantflocculator Composition [Volume 19, Issue 2, 2006, Pages 111-119]
  • Semsarzadeh, M.A. Investigation of PVC and PVC/NBR Microporous Sheets and their Application in Production of Synthetic Paper [Volume 19, Issue 3, 2006]
  • Semsarzadeh, M.A. Design and Manufacture of Actuator Based on Smart Shape Memory Polymer [Volume 19, Issue 1, 2006, Pages 23-32]
  • Shaieloozadeh, H. The Effect of Different Marine Coatings on the Frictional Drag Force of Vessel [Volume 19, Issue 4, 2006]
  • Shakeri, A. Investigation on the Effect of Type, Quantity and Size of Straw Particles on the Mechanical Properties of Crops Straw-High Density Polyethylene Composites [Volume 19, Issue 4, 2006]
  • Sheikh, N. Investigation of Photo-biodegradation of Starch-filled Polyethylene Films under the Environmental Conditions of Tehran [Volume 19, Issue 5, 2007]
  • Shokri, A.A Effect of Mixing Procedures and Conditions on Mechanical and Rheometrical Properties of NBR/PVC Blends [Volume 19, Issue 3, 2006]
  • Sobhani, H. Investigation on the Effect of Extensional Flow on the β-Crystalline Phase Formation in Extruded PVDF Films [Volume 19, Issue 1, 2006, Pages 43-51]
  • Sohrabpour, M. Investigation of Photo-biodegradation of Starch-filled Polyethylene Films under the Environmental Conditions of Tehran [Volume 19, Issue 5, 2007]

T

  • Taghizadeh, S.M. The Effect of Chitosan MolecularWeight on the Rate of Drug Release of Prednisolone Sodium Phosphate from Chitosan Microspheres Prepared by Spray Dryer [Volume 19, Issue 3, 2006]
  • Tamri, Z. Investigation of PVC and PVC/NBR Microporous Sheets and their Application in Production of Synthetic Paper [Volume 19, Issue 3, 2006]
  • Tari, M. Application of Silane Compounds for Improving Adhesion of a Silicone Elastomer Top Coat to an Epoxy Primer [Volume 19, Issue 1, 2006, Pages 33-41]
  • Torkman, J. Sulfonation Effect on Reactivity of Tree Bark Extractive Materials [Volume 19, Issue 1, 2006, Pages 53-58]

V

  • Vafaeian, M. Effect of MolecularWeight of Polyvinyl Acetate on Volume Shrinkage of an Unsaturated Polyester Resin [Volume 19, Issue 3, 2006]
  • Valipour, P. Bleeding Reduction of Cotton Fabrics Dyed with Bifunctional Reactive Dyes during Laundering Using Polymeric Materials [Volume 19, Issue 1, 2006, Pages 59-66]

Y

  • Yaghmaie, S. Chitosan Extraction by Fungi in Solid State Fermentation [Volume 19, Issue 3, 2006]
  • Yazdan shenas, M.E. Bleeding Reduction of Cotton Fabrics Dyed with Bifunctional Reactive Dyes during Laundering Using Polymeric Materials [Volume 19, Issue 1, 2006, Pages 59-66]
  • Yousefi, A.A Investigation on the Effect of Extensional Flow on the β-Crystalline Phase Formation in Extruded PVDF Films [Volume 19, Issue 1, 2006, Pages 43-51]
  • Yousefi, A.A. Viscoelastic Behaviour of Asphodel-Borax Gels [Volume 19, Issue 1, 2006, Pages 3-11]

Z

  • Zargaran, M. Studies of Effect of Reaction Conditions and the Type of Reagent on the Mechanical Properties of Modified Acrylic Fibers with Adsorptivity of Ionic Compounds [Volume 19, Issue 5, 2007]
  • Ziaolhagh, S.J. An Investigation of Reactive Compatibilizer Effect on Thermal, Thermomechanical, Rheological-morphology Properties of PTT/m-LLDPE Blends [Volume 19, Issue 2, 2006, Pages 151-161]